The Model TAL-5M is designed and manufactured by TAKE-A-LABEL Inc. Machine may be table top or wall mounted. Constructed out of steel and aluminum for reliability.

​

• 5" Max Web Capacity

• 8" Max Roll Diameter

From:

The Model TAL-10M is a larger version of the TAL-5M.  Utilizing the same steel frame construction, this unit is built to last and clean up any work area.

​

• 10" Max Web Capacity

• 8" Max Roll Diameter

From:

The TAL-40M is a 20" wide double decker manual dispenser. If you are using several different labels, this is your solution.

​

• 20" x 2 Max Web Capacity

• 8" Max Roll Diameter

From:

The TAL-250M is a Manual Label Dispenser that is simple to use. The heavy duty design comes from the electronic version. The TAL-250M also features a 12" diameter roll capacity, a web capacity of up to 2.5" and a waste rewind spindle.  This manual dispenser is designed for heavy use.

​

​

From:

The TAL-450M is a Manual Label Dispenser that is simple to use. Utilizing the same heavy duty frame as the TAL-250M this Label Dispenser is designed to give years of operation. The TAL-450M features the same 12" diameter label roll diameter and a waste rewind spindle as the TAL-250M but has a upgraded web capacity of up to 4.5" 

​

From:

The APN-30 is a simple but efficient way to apply labels on to almost all surfaces. 

​

• Web Width - 1 13/16

• Roll Diameter - 3 1/2"

• 1" Core 

From:

The APN-60 is a larger version of the APN-30 with the capability to apply larger labels.

​

• Web Width - 2 5/16"

• Roll Diameter - 3 1/2"

• 1" Core

From:

The APN-100 is our largest hand held Applicator.

​

• Web Width - 3 15/16"

• Roll Diameter - 3 1/2"

• 1" Core 

From: